Features: salt spray test is for a variety of materials surfaces by electroplating, anodizing, coating, anti-rust oil anti-corrosion treatment, testing the corrosion resistance of their products ah, Xin Bao instruments specializing in the production of constant temperature and humidity box, thermostat constant humidity, temperature and humidity test chambers, tensile testing machine, carton compression testing machine, rupture strength testing machine, etc. 

 Salt spray experiment details: 

 Salt spray test, the neutral salt spray test, salt spray test chamber products features: 

 : Body Material: 
 1:5 MM imports of gray PVC board 
 2: Racks: ￠ 10.0MM tempered glass rod corrosion. Steel V-shaped frame with a glass rod compartment, to ensure that the test material into a 30 degree angle. 
 3: the bracket of the body: the SECC channel the angle iron painting. Four slide can be pushed (limited to 120 or 120 models). 
 4: Pressure barrel seamless 2.0MMSUS201 stainless steel plate welding. 
 6: fever titanium tube. Long life, high levels of corrosion resistance. 
 7: The cover 5MM imported transparent acrylic sheet production, fine workmanship, beautiful appearance, transparency 

 : Body Specifications (XB-60A): Inner box size: 600 * 450 * 400 (L * M * H) Carton size: 710 * 560 * 560 (L * M * H) 

 3: Control system: 
 1.DHC temperature controllers, digital PID automatic calculation, SSR output, high stability platinum temperature probe. The salt spray test temperature is mistaken for ± 1 ℃. 
 Pressure drums with Henry's law, in order to heated humidification, laboratory humidity above 95%, in line with national standards. 

 : Timing system: high-precision multi-function timer, the test time can be set to multi-functional, can be to set 0.001S-999.9H. With power failure memory function, according to blackout after calls 
 Before the time to continue working until the product to complete the requested time, to avoid the blackout after the experiment redo. 

 : Water System: Auto / Manual watering system, with the water level is low auto / manual replenishment functions. Without interruption to meet the requirements of guests diversified environment. (Automatic 
 Replenishment only need access to water pipe can) 
 : Heating methods: salt spray experiment using direct steam heating methods, heating speed, temperature distribution, reducing the short standby time. 

 7: Control mode: five key standard operating with full detect failure early warning system. Can be lit when a fault occurs. Five key operation for a power switch, an operation switch, spray 
 Fog switch, time switch, and defog switch. Experiments open the power switch apparatus to automatically add water, add water to open the operating switch is complete. Set up the experimental temperature, automatic heating apparatus 
 , Spray switch instruments spray began to open, open the timing, set the time after the end of the experiment to complete. Built-in manual demisting function can be placed during the experiment or to view products 
 Remove the experimental accumulation of salt spray. 

 8: security devices: 
 1 with a double over-temperature protection, temperature controller failure or heating system failure can be automatically cut off the heating power. To avoid too high temperature damage to equipment. 
 Double low water level protection to prevent the laboratory and the pressure barrel heat pipe dry damaged. 
 3 attached to overload short-circuit protection. Prevent abnormal damage to the instrument and instrument internal electrical control accessories. Any of a low water level 

 9: The measurement of cylinder: built-in fog volume collection tube two (XB-60 a). Than traditional external more difficult to break something. 

 10: Nozzle: Precision quartz glass nozzle. Ensure that the use of 4000 hours is not crystalline. Spray tower attached to the conical dispersion guiding fog, adjust the amount of section fog, and the uniform off the fog 
 Function. 

 11: Seal: inside and outside the box to connect the seal groove, the use of water seal to prevent salt spray leakage. 

 12: the control panel and electrical accessories: temperature (T & H), two pressure gauges (Taiwan) is an indicator (Taiwan), a plot of six timer (OMRON) (Ara), a control switch (Taiwan) SSR (Taiwan Yangming), two relays (Japan Omron), three temperature lines (Taiwan God Jie) two pressure regulating valve (AIRTAC), two solenoid valves (AIRTAC) four water levels (Xiang Yang, Taiwan) four heat pipe (titanium tube) two EGO an 

 Thirteen: Accessories Description: V-shaped support material 24 (Type 60) O-matter stick 8 (type 60) the 5000ML the amount of sodium chloride bottles of a PH test paper packet 50ML graduated cylinder one (60 type) 

 14: Temperature Range: 
 1: Laboratory temperature: 35 ℃ -50 ℃ (arbitrarily set) 
 2: Pressure barrel temperature: 47 ℃ -63 ℃ (arbitrarily set) 

 XV: heating rate: 
 1: laboratory, at room temperature - → 35 ° C for about 35 minutes 
 2: Pressure barrel, at room temperature - → 47 ° C for about 15 minutes 

 16: Temperature Accuracy: ± 1 ° C 17: This machine is applicable to neutral salt spray test (NSS) and the corrosion test (AASS, CASS). 
 Use standard: CNS3627, 3885,4159,7669,8886, JIS D-0201, H-8502, H-8610, K-5400, Z-2371, ISO 3768,3769,3770, ASTM B-117, B-268 , GB-T2423, GJB 150. 

 Product Specifications: 


 Model 
 XB-60 
 XB-90 
 XB-120 
 XB-160 
 XB-200 

 Test chamber Box Size LxWxH (cm) 
 60x45x40 
 90x60x50 
 120x100x50 
 160x100x50 
 200x100x60 

 Test outdoor Box Size LxWxH (cm) 
 107x60x118 
 141x88x128 
 190x130x140 
 230x130x140 
 270x130x150 

 Test chamber temperature 
 Saline test method (NSS ACSS) 35 ° C ± 1 ° C / 50 ° C ± 1 ° C corrosion test (CASS) 

 Pressure barrel temperature 
 Saline test method (NSS ACSS) 47 ° C ± 1 ° C / corrosion test (CASS) 63 ° C ± 1 ° C 

 Brine temperature 
 35 ℃ ± 1 ℃ to 50 ℃ ± 1 ℃ 

 Laboratory capacity 
 108L 
 270L 
 480L 
 800L 
 1440L 

 Brine tank capacity 
 15L 
 25L 
 40L 
 40L 
 40L 

 Brine concentration 
 5% or 5% of the concentration of sodium chloride solution, the concentration of sodium chloride solution add 0.26 g of copper chloride (of CuCl2 2H2O per liter) 

 Compressed air pressure 
 1.00 ± 0.01kgf/cm2 

 Spray volume 
 1.0 ~ 2.0ml/80cm2/h (collect at least 16 hours, the mean value) 

 Relative humidity of the laboratory 
 More than 85% 

 PH PH 
 6.5 ~ 7.2 3.0 ~ 3.2 

 Spray way 
 Continuous spray / or break then spray 

 Power supply 
 AC220V1Φ10A 
 AC220V1Φ15A 
 AC220V1Φ20A 
 AC220V1Φ20A 
 AC220V1Φ30A 


 Xin Bao instruments specializing in the production of constant temperature and humidity box, temperature and humidity chamber, constant temperature and humidity testing machine, high and low temperature, high and low temperature chamber, the high and low temperature hot and humid boxes, hot and cold shock box, entered the room temperature and humidity box, a large aging room, salt spray test machine, salt spray, salt spray box, tensile testing machine, carton compression testing machine, rupture strength testing machine, etc.